| Drilling capacity in steel |
25 |
25 |
25 |
38 |
| Tapping capacity |
– |
M 16 |
M 16 |
M 22 |
| Morse taper in the spindle |
3 |
3 |
3 |
4 |
| Spindle traverse |
140 |
140 |
140 |
178 |
| Pillar diameter |
120 |
120 |
120 |
139.7 |
| Distance between center of spindle and Pillar front |
260 |
260 |
260 |
311 |
| Max. distance between spindle and table |
610 |
610 |
610 |
555 |
| Max. distance between spindle and base |
1080 |
1080 |
1080 |
1000 |
| Table Working surface |
335 dia. |
335 dia. |
335 dia. |
370 dia. |
| Table Working surface (Manual) |
470 |
470 |
485 |
465 |
| Base Working surface |
318 x 300 |
318 x 300 |
318 x 300 |
370 x 330 |
| No. of spindle speeds |
5 |
10 |
10 |
5 |
| Range of spindle speeds (rpm) |
400 – 520 – 675 – 880 – 1142 |
100 – 142 – 210 – 310 – 450 – 600 – 852 – 1260 – 1860 – 2700 |
100 – 142 – 210 – 310 – 450 – 600 – 852 – 1260 – 1860 – 2700 |
170-250-360-490-680 |
| Feed |
Hand |
Hand |
Auto Feed |
Auto Feed |
| No. of Power feeds |
– |
– |
3 |
3 |
| Range of power feeds (mm/ rev) |
– |
– |
0.1 – 0.2 – 0.3 |
0.095 – 0.190 – 0.285 |
| Power of the spindle drive motor |
0.75 kW / 1 HP, 1400 rpm, 415 V AC, 3 Ph 50 Hz |
0.75 kW / 1 HP, 1400 rpm, 415 V AC, 3 Ph 50 Hz |
1.5 kW / 2 HP, 1400 rpm, 415 V AC, 3 Ph 50 Hz |
1.5 kW / 2 HP 1400rpm, 415 V AC, 3 Ph 50 Hz |
| Space occupied ( L x B x H ) |
850 x 600 x 1875 |
850 x 600 x 1975 |
850 x 600 x 2080 |
1100 x 640 x 2200 |
| Net weight |
360 Kg |
420 Kg |
610 Kg |
850 Kg |
NOTE: We reserve the right to modify and improve the specification without notice, the specification shown above is for reference only.
